Typical Application
- All types of form works used
for concreting.
- Moulds in precast industry.
- Moulds in precast industry where
steam curing is done.
- Moulds in casting concrete in
hot weather conditions.
Features /
Advantages
- Easy to apply, resistant to heat
upto 100ºC hence especially
suitable in hot weather concreting
areas on moulds.
- Plasters, screed can be applied
later on the surface as MASTEROL-MRA
does not give bonding problem to
the concrete.
- Provides high quality concrete
surface with sharp corners.
- Can be used in all kinds of moulds.
- Protects wooden form work from
absorbing water and swelling.
- Protects steel form work against
corrosion.
- Extends form work life - easier
cleaning between uses.
Directions
of use
Method for application
MASTEROL-MRA should
be applied on moulds after cleaning
them. It can be applied by brush,
sponge, conventional mould oil spray
or by cotton waste. MASTEROL-MRA
should be applied only in concentrated
form and should not be diluted further
with solvent or water. The coverage
is approximately 30-50m2 per litre.
Excessive application should be avoided.
Cleaning of tools and equipments
Tools and equipment should be cleaned
with solvent e.g. Turpentine, Xylene,
and Toluene etc.
Storage and shelf life
Store the material at cool and dry
place (25°C temp. & 50% RH).
Shelf life is 2 year from the date
of manufacture.
Packing
5, 20 and 200 Ltrs. containers.
Precautions
When it falls on the skin, it should
be washed well with soap & water.
|
