|
FEATURES / ADVANTAGES
- Solvent based: Effectively removes
oil, grease and some resinous compounds
- Non-,corrosive : Will not attack
concrete, wood or metals.
- Easily applied : No special equipment
required.
- Labour saving: Penetrating action
lifts grime quickly.
TYPICAL APPLICATION
Floors and machinery in factories,
garages, warehouses, etc.
Pre-treatment of floors prior to application
of surface coatings, sealers and toppings.
Cleaning of moulds and formwork prior
to application of shutter paint and
release agents.
TYPICAL CHARACTERISTICS
Nature Colour
|
:
|
Single component liquid |
Colour
|
:
|
Brown/Dark
Brown colour |
| Specific
Gravity |
:
|
0.83- to 0.84 at 27° C |
DIRECTIONS
FOR USE
1) Preparation
In the interests of speed and economy
thick deposits of grime should first
be removed by mechanical means.
2) Treatment
Undiluted MASTERKLEN DGA should be
liberally applied and scrubbed well
into the attacked areas. Once applied
it should be left for at least 20
minutes to allow the grime to emulsify
totally. The softened grime can then
be washed away by hosing with water
or stream by scrubbing with a stiff
broom. The residue can then be channelled
away to a drain or mopped up. For
floors, a final treatment-with sawdust
will speed up drying out.
3) Severe contamination
For heavy deposits on large areas
of concrete floors, the use of steam
generator_and a heavy duty floor scrubber
fitted with a wire brush will found
advantageous. In case of extreme deposits
where a surface topping is to be applied,
mechanical scabbling is advisable.
4) Use as a dip .
Small items can be immersed overnight
in a dip of MASTERKLEN DGA then hosed
down with water.
STORAGE & SHELF LIFE
2 years shelf life. Protect
from direct sunlight. Keep away from
sources of heat.
Important: Reseal container carefully
after use and before disposal.
PACKAGING: MASTERKLEN
DGA is supplied in 5 and 20 litre
cans.
COVERAGE: The coverage rate
will depend upon the degree of contaminations
but should be between 3 to 5 sq. mtr.per
litre.
PRECAUTIONS: Gloves
and barrier creams should be used
when handling MASTERKLEN DGA. If contact
with material occurs wash with soap
and water. Do not use solvent. Goggles
should be worn but should any accidental
eye contamination occur, wash thoroughly
with plenty of water and seek medical
treatment immediately. Ensure adequate
ventilation avoid inhaling vapours.
Wash off any spillages with water.
MASTERKLEN DGA contains flammable
solvents. Ensure adequate ventilation
and do not use near a naked flame
or smoke.. |
