• Quickly removes the cement dust, concrete and mortar remainders and stains.
• It contains corrosion inhibitors hence chances of rusting of surfaces are decreased.
• It can be used even in area in food industry.
• It is supplied in concentrated form and dilution with water has to be done at site. Hence it is economical.

TYPICAL APPLICATION

• Used for removal of hardened concrete and mortar from machinery equipment and tools.
• Used for surface preparation prior to application of surface coatings.
• Used as a cleaning agent to remove cement, concrete dust on ceramic tiles, granite stone etc.
• Used to remove cement - concrete dirt in food and pharmaceutical industries, drinking water storage areas and swiming pools.
• Used for cleaning formwork, moulds ready mixed trucks, concrete mixers etc.
• Used dor removal of stains on wood, rubber, glass, plastic and metals except zinc and galvanised steel.

TYPICAL CHARACTERISTICS

DIRECTIONS FOR USE


(A) Dilution: MASTERKLEN AEA has to be used only in diluted form. Depending upon the type of Dust, Dirt, normally the dilution with water should be 1:5 to 1: 1 by volume.
MASTERKLEAN AEA : 1 part by volume
Water : 1 to 5 parts by volume
First determine the optimum MASTERKLEN dilution by doing a small trial area.

(B) General Application Guidelines
1. Choose the optimum dilution rate of MASTERKLEAN AEA with water (MASTERKLEAN AEA - 1 part, water 1 to 5 parts)
2. Pre-wet the substrate with water
3. Apply diluted MASTERKLEAN AEA liberally using broom / brush on the substrate.
4. After 15 to 20 minutes. Rub the surface with wire brush to clean. Repeat the process till you get a clean surface.
5. Wash with plenty of water 2 to 4 times thoroughly.

(C) Important to note
MASTERKLEAN AEA should not be used with Dme stone. marble. sand stone etc.. Metallic surfaces has to be washed off with plenty of water immediately after using MASTERKlEAN AEA. Test the material at site for a Small area and then use it for large areas. Do not use MASTERKLEAN AEA on zinc and galvanized steel.


PACKING: 5 & 20 litre containers


STORAGE & SHELFLIFE: Store the material at a cool & dry place. Shelf life is 2 years when the material is in unopened condition.


PRECAUTIONS: MASTERKlEAN AEA should not be used on zinc and galvanized steel.
MASTERKLEAN AEA is a corossive material. It must be always applied with safety tools like rubber gloves and goggles. Avoid contact with skin. If MASTERKLEAN AEA by chance falls on the skin, wash immediately with pleanty of water. Splashes on the eyees should be washed immediately with pleanty of water and medical advice should be taken.