System Components
Cast-in-place Steelflex® Strip Seal Expansion Joint Systems consist of two
proprietary components: steel rail profiles and a matching neoprene sealing element.

Steel Rail Profiles
Steelflex® rail profiles are one-piece construction, manufactured using innovative hot rolled/non-machined, non welded. All proprietary steel rails are available in ASTM A36 or ASTM A588/A572 steel grades.
Recent design improvements have eliminated all horizontal
"legs" on the proprietary steel rail profiles to facilitate proper concrete placement during installation. Independent field and laboratory testing has demonstrated that improperly consolidated concrete around the steel rail, anchorage, and/or reinforcement could lead to performance issues. Anchorage of the proprietary steel rail profile into the dec_ concrete is the primary load carrying mechanism and, therefore, is it critical to ensure long-term performance.
Steelflex® SSCM2 rail profile has become widely accepted worldwide as an economical standard in the industry. Other proprietary steel profiles are also available to satisfy your specific project needs.

This expansion joint system confirms to the specification of IRC
and approved by MORTH vide circular no. RW/NH/34059/2/2001/S&R(B) Dt. 03.02.2003

Drawing showing details of typical general arrangement of Steeflex Stripseal
Expansion Joint with plate -loop anchorage system.

Sealing Element Cross-Section	Sealing Element	Movement Range MRl      MRT		Joint Opening	Corresponding Steelflex Rail
A2R-XTRA*	A2R-400 A2R-XTRA*	100 175	+50 +50	15-115 15-190	SSCM2A
A2R-O	A2R-O	100	+15	25-125
L2	L2-400 L2-500	100 125	+50 +50	0-100 0-125	MODULAR JOINTS
L2-O	L2-O	100	+15	25-125