PRODUCTS>> Floor Coatings, Floor Hardners & Sterile Coating
 

Masterprime 75
EPOXY PRIMER FOR CONCRETE & MASONRY SURFACE



DESCRIPTION


It is a two component solvent free, epoxy resin based primer, suitable for priming concrete / steel surfaces
prior to the application of choksey's range of epoxy
resin based toppings like Techfloor range or
Mastercoat range of products. It is ideally suited for priming floors prior to self leveling / epoxy coated application in chemical / pharmaceutical industries.


FEATURES / ADVANTAGES

  • Excellent adhesion over concrete & masonry surface.
  • Easy to apply by brush/roller.
  • Can be applied even on damp surfaces.

 

 

  • Good penetrating property suitable for steel and concrete surfaces.


TYPICAL APPLICATIONS

  • For priming on concrete surfaces and steel substrates.
  • Floors, walls, chemical storage tanks, effluent treatment tanks, lining of bulk chemical storage tanks etc.



TYPICAL CHARACTERISTICS

 Pot life at 30°C
:
Approx. 60 minutes
 Tack free time
:
Approx. 4 hours at 30°C
 Initial Hardness
:

24 hours at 30°C

 Temperature limitation for  product application
:

5° C to 40° C




DIRECTIONS FOR USE
SURFACE PREPARATION.
The surface has to be dry, sound & free from loose particles. This can be achieved by grit blasting or sand blasting or grining and water jetting. The surface should not have moisture content of more than 4%. The surface should not contain any laitance. grease, oil or any other contamination. Use Choksey's Masterklean range of products for the same. For leveling the substrate use Choksey's Epoxy based "Techfloor mortar"/CHOKSEY’S Epoxy Putty. When applying on steel surfaces they should be s and or grit blasted. Small areas can be cleaned with wire brush.


MIXING OF MASTERPRIME 75

The pre-weighed ready to use components of Masterprime 75 are mixed thoroughly with a mechanical stirrer with a rpm of 300-350.
The mixing should be done till we get a homogenous colour of the mixed material.
The material is brushed on the well prepared surface by a standard paint brush, good quality lambwool roller or sprayed with an airless spray equipment. Care should be taken to ensure continuous film and proper material consumption.

COVERAGE: The coverage will be about 4 to 6 m² per Kg. Coverage varies depending on the substrate conditions.

STORAGE AND SHELF LIFE: SHELF LIFE : 1 year. Store the material at a cool and dry place.

CLEANING OF TOOLS & EQUIPMENTS
Tools have to be cleaned using Choksey's Masterklean SOL.

PACKING: 1Kg and 5 Kg.

PRECAUTIONS:
MASTERPRIME 75 should be applied with gloves and care should be taken to see that it does not fall on eyes. Splashes on to the skin have to be cleaned only with plenty of water only and medical advice has to be taken.



 
Home l Profile l Projects l Products l Services l Branches l Credentials l Recognition l R&D l Clients l Global Partners l Exports l Contact us

© Choksey Chemicals Pvt. Ltd. - Corporate Communication. All rights reserved
38,27«2 ,