PRODUCTS>> Floor Coatings, Floor Hardners & Sterile Coating
 

Masterprime 54
TWO COMPONENT PRIMER FOR CONCRETE & MASONARY SURFACE



DESCRIPTION

It is a two component solvent free epoxy resin based primer suitable for priming concrete / masonary
surfaces prior to the application of Choksey's range of epoxy resin based toppings like Techfloor range or Mastercoat range of products. It is used as a primer for epoxy screed applications (for our Techfloor mortar application).

 

 

   
FEATURES / ADVANTAGES
  • Excellent adhesion
  • Easy to apply by brush/roller
  • It is solvent free.


TYPICAL APPLICATIONS

  • For priming on concrete surfaces and masonary substrates.
  • Floors, walls, chemical storage tanks, effluent treatment tanks, lining of bulk chemical storage tanks etc.



TYPICAL CHARACTERISTICS

 Pot life at 30°C
:
About 40 minutes
 Tack free time
:
Within 12 hours at 30°C
 Initial Hardness
:

Within 24 hours at 30°C

 Temperature limitation for  proper product application
:

15°C to 40°C.




DIRECTIONS FOR USE
SURFACE PREPARATION
The surface has to be dry, sound & free from loose particles. This can be achieved by grit blasting or sand blasting or grinning and water jetting. The surface should not have moisture content of more than 4%. The surface should not contain any laitance, grease, oil or any other contamination. Use Choksey's Masterklean range of products for the same. For leveling the substrate use Choksey's Epoxy based “Techfloor mortar”/ CHOKSEY’S Epoxy Putty. When applying on steel surfaces they should be sand or grit blasted. Small areas can be cleaned with wire brush.


MIXING OF MASTERPRIME 54

The preweighed ready to use components of Masterprime 54 are mixed thoroughly with a mechanical stirrer with a rpm of 300-350.
The mixing should be done till we get a homogenous colour of the mixed material.

The material is brushed on the well prepared surface by a standard paint brush, good quality lambwool roller or sprayed with an airless spray equipment. Care should be taken to ensure continuous film and proper material consumption.

COVERAGE: The coverage will be 4 to 6 m² per Kg. Coverage varies depending on substrate condition.

STORAGE AND SHELF LIFE: SHELF LIFE : SHELF LIFE : 1 year. Store the material at a cool and dry place.

CLEANING OF TOOLS & EQUIPMENTS
Tools have to be cleaned using Choksey's Masterklean SOL.

PACKING: 1 Kg. and 5 Kg.

PRECAUTIONS:
MASTERPRIME 54 should be applied with gloves and care should be taken to see that it does not fall on eyes. Splashes on to the skin have to be cleaned only with plenty of water only and medical advice has to be taken.



 
Home l Profile l Projects l Products l Services l Branches l Credentials l Recognition l R&D l Clients l Global Partners l Exports l Contact us

© Choksey Chemicals Pvt. Ltd. - Corporate Communication. All rights reserved
ate ‘L