Applications
- Window and
Door Frames
- Corner Joints
- Baseboard
- Moulding
- Vents
- Sliding and Trim
- Other Gaps and Openings
|
Excellent adhesion on
- Concrete
- Plaster
- Brick
- Drywall
- Painted Surface
- Wood
- Metal
|
Specifications
Exceeds the ASTM Specifications
C-834-91
Surface Preparation and application
Remove old caulk from surface. • Make
sure that surface is clean, dry and free
of loose debris • Trim the nozzle
to the desired bead size • Then puncture
the foil using any pointed object (as shown
in figure 2) • Load the cartridge
into caulking gun • Hold the cartridge
at a 45 angle and fill the seam with ample
amount of sealant
Figure 2 |
For best results
Do not apply PAINTEX when rain or freezing
temperatures are forecasted • Store
away from extreme heat or cold • Do
not use PAINTEX below waterline applications
• Joint size should not exceed ½”(wide)
x ½” (deep). • If joint
exceeds ½”use polyethylene
foam as a backup filler • Do not use
for filling surface defects, built joints,
duck pointing or expansion joints.
Clean Up
Before curing, remove excess material with
a damp cloth. After product is cured, excess
material must be cut or scrapped away. Clear
the tools with help of water.
Painting guidlines
PAINTEX can be painted
with latex or oil based paints and stains.
Allow 5 or more hours before painting. PAINTEX
appears white when applied and remains white
after drying within 7 to 14 days depending
on the thickness, temperature and humidity.
Packaging
Standard Packing : 350g cartridge and 1
Kg tin
Colour : white or light grey after drying
Precaution
Do not use in high abrasion area or underwater.
|
