Applications
- Window and
Door Frames
- Corner Joints
- Baseboard
- Pipes
- Moulding
- Vents
- Sliding and
Trim
- Other Gaps and
Openings
- Crack
filling of internal / external walls
|
Excellent adhesion on
• Wood
• Plaster
• Brick
• Drywall
• Glass
• Painted Surface
• Metal
• Concrete
|
Specifications
Exceeds the ASTM Specifications
C-834-91
Surface Preparation and application
Remove old caulk from surface. • Make
sure that surface is clean, dry and free
of loose debris • Trim the nozzle
to the desired bead size • Then puncture
the foil using any pointed object (as shown
in figure 2) • Load the cartridge
into caulking gun • Hold the cartridge
at a 45 angle and fill the seam with ample
amount of sealant
 |
For best results
Do not apply when rain or freezing temperatures
are forecasted • Store away from extreme
heat or cold • Do not use below waterline
applications • Joint size should
not exceed ½”(wide) x ½”
(deep). • If joint exceeds ½”use
polyethylene foam as a
backup filler • Do not use for filling
surface defects, built joints, duck pointing
or expansion joints.
Clean Up
Before curing, remove excess material with
a damp cloth. After product is cured, excess
material must be cut or scrapped away. Clear
the tools with help of water.
Painting guidlines
Can be painted with latex or oil based paints
and stains. Allow 5 or more hours before
painting.
KLEARSIL appears white when applied and
becomes clear after drying within 7 to 14
days depending on the thickness, temperature
and humidity.
Packaging
Standard Packing : 350g cartridge and 1
Kg tin
Colour : Clear after drying
Precaution
Do not use in high abrasion area or underwater.
|
