PRODUCTS>> Admixture

 
/map>


MASTERPLAST SPL 1 is a Liquid Plasticising admixture for cement concrete & mortar. It has a powerful dispersing and defloculating effect on the particles of cement. It makes the concrete flowing and self compacting. with an added advantage of high early and long term strength. It allows concrete with 50-100 slump to be easily compacted with minimum vibrations. It allows upto 30% water reduction in guaging water of concrete mix.


Technical Information

Characteristics

 Nature
 Colour

:
:
Single component, Liquid
Dark Amber, Brownish
 pH Value
 Specific Gravity 30°C
 Viscosity of flow Cup B4 at 30°C
:
:
:


7-8
1.22 ± 0.020
Medium viscous liquid


 Foaming action
:

No foaming

 Compatibility




:




Compatible will all types of Portland Cement, including sulphate resisting cement. Compatible with all other admixtures.
 Air entrainment


:


Approximately 1 % additional air over control concrete.

Chloride content


:

NIL, according to BS 5075 PART -1 and IS 456-1978

 

 

 

Features / Advantages
  • It permits the reduction of water to cement ratio.
  • Due to water reduction it increases not only early and ultimate compressive strength but all other strengths of the concrete, giving dense / compact concrete.
  • It improves workability of the concrete.
  • It reduces segregation in the concrete.
  • It improves finished appearance of the concrete by minimising honey combed surface.
  • permits faster mould turnover time for precasters.
  • It reduces energy required for curing.
  • It allows lowering of cement content without affecting the normal strengths of the concrete. . Non-foaming.
  • Non-toxic.
  • It does not contains Chlorides or Nitrates.
  • It does not corrode the reinforcements.


Usage

  • Precast concrete
  • Prestressed concrete
  • Ready mix concrete e.g. closely spaced areas, large bay areas, floor slabs, roof decks & other structures etc.


Engineering Data


  Specification Complies







:

:

:


Indian Standard Specification IS 9103-1999
British Standard Specification BS 5075 Part I
ASTM-C-494, Type A,F
  Trial Result (May be taken as a   reference only) M-30 mix    
  Mix Constituents    
  Cement
:
OPC (IS 269- 1989)
  Sand
:
38% (IS 383-1970, Zone II)
  Aggregate (20 mm to 5 mm)
:
62% (IS 383-1970)

  20mm to 5mm
   

Trial Mix
Cement
Kg/m³
Dosage per 50 Kg of Cement- Litres
W/C
ratio
Compressive strength Kg/Cm2
Slump
in mm
3D
7D
28D
 Reference  Concrete
400
NIL
0.49
65
180
300
450
 Plasticised
400
0.5
0.49
180
175
305
460
Strength enhanced
400
0.5
0.40
55
290
470
620


Direction for use


DOSAGE:
Dose of 500 cc per 50 Kg. bag of cement is usually sufficient to produce flowing concrete with 8 to 10% water reduction. To expect 25-30% water reduction, 1000 cc per 50 Kg. bag of cement is required. Add Masterplast SPL-1 to the concrete mix along with the mixing water (gauging water) by using measured container or dispenser. Stir well before use.

For best results it should be added to the concrete mix two minutes prior to pouring. Mixing period of 2-3 minutes is suficient for mixing in efficient concrete mixers and for 5-7 minutes for average truck mixing. To obtain maximum advantages of MasterPlast SPL -1, concrete mix should be redesigned or tested by normal trail batch methods.


CLeaning of Tools & Equipments
Tools and equipments can be cleaned with water.

STORAGE AND SHELF LIFE
Store the material at a cool & dry place (at 25°C Temp. & 50% RH). Shelf life is Two Year. It will freeze at (thawing) temperatures but can be reconstituted by stirring.


PACKING

1 Litre, 5 Litre, 20 Litre., 200 Litre


PRECAUTIONS

Do not mix with dry cement. Add to mixing (gauging) water or directly to the wet mix. Stir well before use.



 
Home l Profile l Projects l Products l Services l Branches l Credentials l Recognition l R&D l Clients l Global Partners l Exports l Contact us

© Choksey Chemicals Pvt. Ltd. - Corporate Communication. All rights reserved